个人简述:

主要从事智能加工，CAD/CAM，加工动力学的研究，担任International Journal of Machine Tools and Manufacture, Computer-Aided Design, Journal of Computational Design and Engineering, Journal of Industrial and Production Engineering, Noise ControlEngineering Journal等期刊的审稿人。中国工程院第四届中美工程前沿研讨会先进制造组中方代表。主持国家自然科学基金 2 项，参与973课题1项，国家自然科学基金4项。

科研工作:

2012.11-至今：西北工业大学  助理研究员2012.04-2012.10： 西北工业大学 机械工程博士后 主要研究方向: 加工动力学、CAD/CAM、智能加工、多轴数控加工编程主持的科研项目：国家自然科学基金：51611130191 ，基于嵌入式传感器的薄壁件铣削加工过程监测方法研究，2016-2018 国家自然科学基金：51305354 ，航空复杂薄壁件铣削加工界面耦合作用与系统响应机制研究 ,2014-2016产学研合作项目：高效铣加工技术产学研合作项目：材料切削加工性能研究参与的科研项目：973课题：复杂薄壁件切削加工过程的演化模型及其自适应进化机制国家自然科学基金：51575453 ，航空发动机难加工材料切削基础数据模型与标准试验方法 国家自然科学基金：51475382 ，航空薄壁环形件多轴加工的时变动力学模型及其稳定性分析 国家自然科学基金：51475381，复杂薄壁件高效高精多轴加工的几何建模与工艺优化 1.M. Luo, J. Wang, B.H. Wu, D.H. Zhang. Effects of cutting parameters on tool insert wear in end milling of titanium alloy Ti6Al4V. Chinese Journal of Mechanical Engineering, (2016). doi:10.3901/CJME.2015.0405.045 2.M. Luo, D.Q. Luo, B.H. Wu, D.H. Zhang. Barrel cutter design and toolpath planning for high-efficiency machining of freeform surface. International Journal of Advanced Manufacturing Technology (2015). doi:10.1007/s00170-015-8113-z3.M. Luo, X.F. Zhang, B.H. Wu.  Damping support fixture for vibration suppression in milling of thin-walled casing. AIM2015, IEEE/ASME International Conference on Advanced Intelligent Mechatronics,  DOI: 10.1109/AIM.2015.7222725 4.M. Luo, X.F. Zhang, D.H. Zhang, B.H. Wu. On-line compressor blade stiffness enhancement in multi-axis machining process. IFAC-PapersOnLine 48-3 (2015) 664–667. 5.F.Y. Han, D.H. Zhang, M. Luo, B.H. Wu. An approach to optimize the tilt angle of indexable table for nonorthogonal four-axis milling of impeller.  The International Journal of Advanced Manufacturing Technology,  2015,  76(9-12):1893-1904.6.J.T. Wang, D.H. Zhang, B.H. Wu, M. Luo,  Y. Zhang. Kinematic Analysis and Feedrate Optimization in six-axis NC Abrasive Belt Grinding of Blades. The International Journal of Advanced Manufacturing Technology,  2015, 79(1):405-414 7.D.Q. Yan, D.H.Zhang, M. Luo. Optimization of Barrel Cutter for Five-axis Flank-milling Based on Approximation of Tool Envelope Surface. Computer-Aided Design and Applications,  DOI:    10.1080/16864360.2015.1033335 .8.X. Zhou, D.H. Zhang, M. Luo, B.H. Wu. Toolpath dependent chatter suppression in multi-axis milling of hollow fan blades with ball-end cutter. The International Journal of Advanced Manufacturing Technology, 2014, 72(5-8):643-651. 9.B.H. Wu, D.H. Zhang, M. Luo, X. Zhou. Collision and interference correction for impeller machining with non-orthogonal four-axis machine tool. The International Journal of Advanced Manufacturing Technology, 2013,68(1-4): 693-700. 10.B.H. Wu, X. Yan, M. Luo, G. Gao. Mechanistic Identification of Cutting Force Coefficient in Bull-nose Milling Process [J]. Chinese Journal of Aeronautics, 2013,26(3):823-830. 11.M. Luo, D. H. Zhang, B. H. Wu, et al. Material removal process optimization for milling of flexible workpiece considering machining stability [J]. IMechE, Part B: Journal of Engineering Manufacture, 2011, 225(8):1263-1272. 12.M. Luo, D.H. Zhang, B.H. Wu, M. Tang. Modeling and Analysis Effects of Material Removal on Machining Dynamics in Milling of Thin-walled Workpiece. 13th CIRP Conference on Modeling of Machining Operations (CIRP CMMO 2011), Sintra, Portugal, 2011. 13. M. Luo, D.H. Zhang, B.H.Wu, F.Y. Han. Tool Orientation Control Using Quaternion Interpolation in Multi-axis Milling of Blade. International Conference on Manufacturing Automation 2010, HongKong, 2010.  14.M. Luo, D. H. Zhang, B.H. Wu, Y. Zhang. Optimisation of spiral tool path for five-axis milling of freeform surface blade. International Journal of Machining and Machinability of Materials, 2010,8(3/4):266-282. 15.罗明, 吴宝海, 李山, 等. 自由曲面五轴加工刀轴矢量的运动学优化方法. 机械工程学报, 2009,45(9):158-163. 16.M. Luo, B. H. Wu, D. H. Zhang, et al. Toolpath Generation for Four-axis Rough Milling of Sculptured Surface Turbine Blade. Lecture Notes in Computer Science, 2008, 5315:887-895. 17.罗明, 吴宝海, 张定华, 等. 一种带缘头避让的叶片高效螺旋加工方法. 机械科学与技术, 2008,27(7):917-921.18.张定华, 罗明, 吴宝海, 等. 智能加工技术的发展与应用. 航空制造技术, 2010, (21):40-43.19.李山, 罗明, 吴宝海, 等. 一种利用点搜索的多曲面体清根轨迹生成方法. 西北工业大学学报, 2009,27(3):351-356. 20.吴宝海, 罗明, 张莹, 等. 自由曲面五轴加工刀具轨迹规划技术的研究进展. 机械工程学报, 2008,44(10):9-18. 21.M. Luo, D. H. Zhang, B.H. Wu, S. Li. Clean-up tool-path generation for multi-patch solid model by searching approach. International Conference on Advanced Design and Manufacture, Sanya, 2008.22.B.H. Wu, M. Luo, D. H. Zhang, Xu Zhou. Deformation Control and Chatter Suppression in 5-axis Milling of Thin-walled Blade. 4th International Conference on High Speed Machining, 2010.

教育背景:

2007.09-2012.03： 西北工业大学机电学院，航空宇航制造工程，博士 2005.09-2008.04： 西北工业大学机电学院，航空宇航制造工程，硕士 2004.07-2005.07： 西北工业大学机电学院，飞行器制造工程，学士 2001.09-2004.06： 西北工业大学，教改班